Dry Wall Mesh Tape

Application

• Self – adhesive, environmentally-friendly
• Faster application, easy to DIY
• Resist cracking, does not rot or bubbles
• It won’t tear, shrink, stretch or bubble
• It is suitable for all kind of chemical surface
• It hides joints, cracks and holes permanently

Features

• Good alkali resistance
• High tensile strength & resistance to deformation
• Excellent self-adhesiveness
• Good smoothness
• Convenient application in construction Drywall Tape

User Guidance

• Wall must be clean and dry.
• Center and apply tape over the length of the joint and pressing firmly.
• Apply a generous first cost of compound over the tape and through the mesh, making sure to completely fill the joint crevice.
• Let dry completely, then sand slightly.
• Apply sufficient thin finishing coats to produce a smooth wall surface.
• Cut of butted boards do not have a tapered edge. Therefore, special care must be taken to assure proper compound penetration of all joints. This may result in slight build-up of compound that will require an increased amount of edge feathering.
• Failure to completely fill the joint may result in cracking.
• For best results, use a setting-type compound.

Available Size

• Common Length: 20m, 45m and 90m.
• Common Width: 50mm